Fujitsu MHW2040BS Product Manual page 183

Bits 1-0:
*2 Word 1, 3, 6, 60-61
Word MHW2120BS
1 X'3FFF'
3 X'10'
6 X'3F'
60-61 X'DF94BB0'
*3 Status of the Word 2 Identify information is shown as follows:
37C8h
8C73h
C837h
Others
*4 Word 49: Capabilities
Bits 15-14: Reserved
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 9:
Bit 8:
Bits 7-0:
C141-E249
Reserved
MHW2100BS MHW2080BS
X'3FFF' X'3FFF'
X'10' X'10'
X '3F ' X'3F'
X'BA52230' X'950F8B0'
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
Reserved
Standby timer value. ATA spec is '1.'
Reserved
'1' = IORDY supported
'1' = IORDY inhibition supported
'1' = DMA supported
'1' = LBA supported
Undefined
5.3 Host Commands
MHW2060BS MHW2040BS
X'3FFF' X'3FFF'
X'10' X'10'
X'3F' X'3F'
X'6FC7C80' X'4A85300'
5-109