Getting Started - D-Link DNR-326 User Manual

Section 3 - Installation

Getting Started

Make sure the NVR is connected to a network via a router or a switch, or directly connected to a PC.
Step 1: Insert the DNR-326 CD in the CD-ROM drive. If the CD Autorun function does not automatically start on your computer,
go to Start > Run. In the Run box, type D:\autorun.exe (where D represents the drive letter of your CD-ROM drive) and click
OK. When the autorun screen appears, click NVR Search Utility.
Step 2: Highlight an available NVR and click Configuration to access the NVR's web User Interface.
For more detailed configuration instructions, please refer to the user manual on the CD-ROM.
D-Link DNR-326 User Manual 12