Using The Configuration Utility - D-Link G520 - AirPlus Xtreme G DWL Manual

Using the Configuration Utility

If you wish to change the default settings or optimize the performance of the
DWL-G520, D-Link has included a configuration utility for this purpose. How-
ever, in Windows XP, you must use either the zero configuration utility or you
can disable it so that you can use the D-Link Configuration utility.
To use the D-Link configuration utility with XP, click on the zero configuration
utility icon in the taskbar in the lower corner of your computer screen and
uncheck the box in the properties window that enables windows configuration.
After you have done this, you can then use the D-Link Configuration utility with
XP.
Before you use the configuration utility for the DWL-G520, you must install the
drivers and the configuration utility from the CD-ROM that came with the
DWL-G520. (Please see the Quick Installation Guide that came with the prod-
uct.) After you have completed this installation and restarted your computer,
you can access the Configuration Utility at any time by clicking on this icon that
will appear on your desktop.
After double-clicking on the icon on the desktop (shown at right),
the Link Info window shown on the next page will appear:
13