Getting Started
Setting up a Wireless Infrastructure Network
4
Please remember that D-Link AirPlus Xtreme G wireless devices are pre-configured
to connect together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the
following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
If you are connecting a desktop computer to your network, you can connect the
D-Link DFE-530TX+ Fast Ethernet PCI Adapter to the Ethernet port on the
DI-624 wireless broadband router using an Ethernet cable.
(See the Quick Installation Guide included with the network adapter for com-
plete installation instructions.)
Install the drivers for the D-Link DWL-G520 wireless PCI adapter into a desktop
computer.
(See the Quick Installation Guide included with the DWL-G520.)
2
1
3
5
11