Using Remote GO!
To use Remote GO!, click or tap the
select Remote GO!
•
Launch Wi-Fi GO! & NFC Remote on your smart device to use the Wi-Fi GO! & NFC
Remote control functions. For more details, refer to section Wi-Fi GO! & NFC Remote
of this user manual for more details.
•
To protect your Wi-Fi utility from unauthorized remote access, click
password.
•
Ensure that the ASUS AI Suite 3 utility is active when using the Remote GO! functions.
Using Wi-Fi GO! & NFC Remote
Wi-Fi GO! & NFC Remote allows you to remotely control your computer using your smart
device.
Launching Wi-Fi GO! & NFC Remote
1.
On your smart device, turn on the Wi-Fi connection. Ensure that your smart device is
within the same network as your computer.
> Enter, then tap the computer you want to connect with your smart
2.
Tap
Wi-Fi GO!
device.
& NFC Remote
Tap OK on the confirmation message.
3.
ASUS SABERTOOTH Z87
on the top edge of the AI Suite 3 main menu, then
Remote GO! menu
Click or tap to
set a password
then set a
4-13