Asus SABERTOOTH Z87 User Manual page 107

Chassis Fan Speed Low Limit 1/4 [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows
you to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1/4 Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature. It allows
you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet chassis fan operation.
[Turbo] Set to achieve maximum chassis fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the Chassis Fan Profile to [Manual].
Chassis Upper Temperature 1/4 [70]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle
and CPU temperature upper limit. The values range from 40ºC to 90ºC.
Chassis Fan Max. Duty Cycle(%) 1/4 [100]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle.
The values range from 20% to 100%. When the chassis temperature
reaches the upper limit, the chassis fan will operate at the maximum duty
cycle.
Chassis Lower Temperature 1/4 [40]
Displays the lower limit of the chassis temperature.
Chassis Fan Min. Duty Cycle(%) 1/4 [60]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle.
The values range from 0% to 100%. When the chassis temperature is
under 40ºC, the chassis fan will operate at the minimum duty cycle.
ASST 1 Q-Fan Control 1/2 [Enabled]
[Disabled] Disables the Assistant Q-Fan control feature.
[Enabled] Enables the Assistant Q-Fan control feature.
Assistant Fan Speed Low Limit 1/2 [600 RPM]
This item appears only when you enable the ASST Q-Fan Control feature and allows
you to disable or set the assistant fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
ASUS SABERTOOTH Z87
3-41