Table of Contents
Advertisement
(*3)
The seek time is as follows:
The start time is the time from power on or start command to when the HDD is ready, and the stop
(*4)
time is the time for disks to completely stop from power off or stop command.
This value indicates during idle mode. Power supply at nominal voltage ±1%. 25°C ambient.
(*5)
(*6)
The maximum data transfer rate may be restricted to the response speed of initiator and by
transmission characteristics. 1MB/s=1,000,000 bytes/s.
(*7)
Refer to 1.1 (14).
(*8)
1MB=1,048,576 bytes.
C141-E234
Seek Difference [4096 Cyl/div]
2.1 Hardware Specifications
2-3
Advertisement
Table of Contents
Troubleshooting
