Entering Characters; C Kanji, Hiragana & Katakana - Sharp VODAPHONE 705SH Introduction Manual

Entering Characters

Kanji, Hiragana & Katakana
Following the example below, enter
enter characters in kanji (hiragana) entry mode.
1 Press 3 three times
Word suggestions change as hiragana
are entered.
2 Press 3 for 1+ seconds
^ When the next character is on the
same key, press the key for 1+
seconds. Cursor moves to the right
and the first character assigned to that
key is entered.
Press 3 twice and press q
3
4 Press 2 twice
^ To enter unconverted hiragana, skip
to learn how to
5 Press D (convert) and use E
to select a word
^ The most recent selection appears first
C
C
C
Press b
6
C Switch to double or single-byte katakana mode to enter
katakana. Alternatively, enter hiragana and then select
katakana from the word suggestion list.
C To convert hiragana to katakana/alphanumerics only, see
P.3-10 "Hiragana to Katakana/Alphanumerics Conversion".
ahead to Step 6.
in the list.
To see other suggestions, press N z
or M J.
To exit the list, press i.
To change segment, see P.3-6
"Segmenting Phrases".
Katakana Entry
3
3-5