Statically Assign A Nip Address - D-Link DSL-321B User Manual

Appendix B - Networking Basics
Statically Assign An IP Address
If you are not using a DHCP capable gateway/Modem, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click on the My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click on the Properties.
Step 4
Click on the Use the following IP address and enter an IP address that
is on the same subnet as your network or the LAN IP address on your
Modem.
Example: If the Modem's LAN IP address is 192.168.1.1, make your IP
address 192.168.1.X where X is a number between 2 and 254. Make
sure that the number you choose is not in use on the network. Set
Default Gateway the same as the LAN IP address of your Modem
(192.168.1.1).
Set Primary DNS the same as the LAN IP address of your Modem
(192.168.1.1). The Secondary DNS is not needed or you may enter a
DNS server from your ISP.
Step 5
Click on the OK twice to save your settings.
D-Link DSL-321B User Manual 43