D-Link DSL-321B User Manual page 10

Section 2 – Installation
VPI
Most users will not be required to change this setting. The Virtual Path Identifier (VPI) is used in conjunction with the Virtual Channel Identifier (VCI)
to identify the data path between your ADSL service provider's network and your computer. If you are setting up the Modem for multiple virtual
connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can
be changed in the WAN Settings window of the web management interface.
VCI
Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path
between your ADSL service provider's network and your computer. If you are setting up the Modem for multiple virtual connections, you will need to
configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN
Settings window of the web management interface.
Information you will need about DSL-321B
Username
This is the Username needed access the Modem's management interface. When you attempt to connect to the device through a web browser you
will be prompted to enter this Username. The default Username for the Modem is "admin." The user cannot change this.
Password
This is the Password you will be prompted to enter when you access the Modem's management interface. The default Password is "admin." The
user may change this.
LAN IP addresses for the DSL-321B
This is the IP address you will enter into the Address field of your web browser to access the Modem's configuration graphical user interface (GUI)
using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will
be the base IP address used for DHCP service on the LAN when DHCP is enabled.
LAN Subnet Mask for the DSL-321B
This is the subnet mask used by the DSL-321B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be
changed later.
D-Link DSL-321B User Manual 10