Figure 4.16 External Operator Panel Connector (Cn1) - Fujitsu MAM3184MC/MP Product/Maintenance Manual

(4) Connector for external operator panel
Connector for 16-bit SCSI external operator panel
CN1 provides connector for the external operator panel other than the SCSI bus as shown in
Figure 4.16. Also, a connector for the external operator panel are provided on the IDD as
shown in Figure 4.17. This allows connection of an external LED on the front panel, and an
SCSI ID setting switch. For the recommended circuit of the external operator panel, see
Subsection 4.3.4.

Figure 4.16 External operator panel connector (CN1)

Pin
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
C141-E134-01EN
Signal
–ID0
Fault LED
–ID1
ESID
–ID2
(Reserved)
–ID3
–LED
OPEN
GND
+5 V
–WTP
4 - 13