The formatted capacity can be changed by changing the logical block length and using spare
(*1)
sector space. See Chapter 3 for the further information.
The number of user cylinders indicates the max., and includes the alternate cylinder. The
(*2)
number of user cylinders and alternate cylinders can be specified at format of the IDD.
The positioning time is as follows:
(*3)
2000
4000
MAA31xxxx
The start time is the time from power on or start command to when the IDD is ready, and stop
(*4)
time is the time for disks to completely stop from power off or stop command.
This value indicates at ready mode.
(*5)
Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.
(*6)
5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.
(*7)
The maximum data transfer rate may be restricted to the response speed of initiator and by
(*8)
transmission characteristics.
The terminator power pin (SCSI connector) which supplies power to other terminators is not
(*9)
used.
6000
8000
10000
6
C141-E035-03EN
2000
4000
6000
8000
MAB30xxxx/MAC30xxxx
10000
2 - 3