Fujitsu MAB3045 Product Manual page 129

Table E.1
MODE SELECT
PF=(page format)
Page 1: Read/write error recovery
Command
(Group 0)
Page 2: Disconnection/reconnection
*1 Fujitsu-specific function
E - 4
SCSI interface function specifications (3 of 8)
Item
AWRE (Automatic Write Reallocation Enabled)
ARRE (Automatic Read Reallocation Enabled)
TB (Transfer Block)
RC (Read Continuous)
EER (Enable Early Recovery)
PER (Post Error)
DTE (Disable Transfer on Error)
DCR (Disable Correction)
Retry count at read
Correctable bit length
Head offset count
Data strobe offset count
Retry count at write
Recovery processing time restriction
Buffer-full ratio
Buffer-empty ratio
Bus inactivity restriction
Disconnection time restriction
Connection time restriction
Maximum burst length
DTDC (data transfer disconnect control)
C141-E035-02EN
: Provided : Not provided
Specification
(15)
(Specified value
ignored)
(12 B: Savable)
(Specified value
ignored)
(Changeable)
(Changeable)
(Changeable)
(Changeable)
(Changeable)
(Specified value
ignored)
(Changeable)
(Changeable)
(Not changeable)
(Changeable)
(Changeable)
(16 B: Savable)
(Changeable)
(Changeable)
(Not changeable)
(Changeable)