Asus VN279H User Manual page 22

2.. Color.
You can adjust Brightness,
Contrast, Saturation, Color Temp.,
and Skin Tone from this menu.
•. Brightness: the adjusting
range is from 0 to 100.
is a hotkey to activate
this function.
•. Contrast: the adjusting range is from 0 to 100.
•. Saturation: the adjusting range is from 0 to 100.
•. Color.Temp.: contains four modes including Cool, Normal, Warm, and
User Mode.
•. Skin.Tone: contains three color modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3.. Image
You can adjust Sharpness, Trace
Free, Aspect Control, VividPixel,
ASCR, Position (VGA only) and
Focus (VGA only) from this menu.
•. Sharpness: the adjusting
range is from 0 to 100.
•. Trace.Free: adjusts the
response time of the monitor.
•. Aspect.Control: adjusts the aspect ratio to "Full", "4:3", or "OverScan"
(only available for the HDMI input).
•. VividPixel: enhances the outline of the displayed picture and generates
high-quality images on screen.
•. ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•. Position.(Only.available.for.VGA.input): adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
•. Focus.(Only.available.for.VGA.input): reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
•
•
3-2
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows
vertical stripes and the image is not proportional.
Chapter 3: General Instructions