Status; Device Info - D-Link DIR-850L User Manual

Section 3 - Configuration
This page displays the current information for the DIR-850L. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect
to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General: Displays the router's time and firmware version.
WAN: Displays the MAC address and the public IP settings.
LAN: Displays the MAC address and the private (local) IP settings for the
router.
Wireless LAN1: Displays the 2.4GHz wireless MAC address and your wireless settings
such as SSID and Channel.
Wireless LAN2: Displays the 5GHz wireless MAC address and your wireless settings
such as SSID and Channel.
LAN Computers: Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP address assigned by the router
(DHCP).
D-Link DIR-850L User Manual

Status

Device Info

106