Pptp - D-Link DIR-850L User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
My Internet Select PPTP (Username/Password) from the drop-down menu.
Connection:
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Enter the Primary and Secondary DNS Server Addresses (Static PPTP
Mask:
only).
PPTP Gateway IP
Enter the Gateway IP Address provided by your ISP.
Address:
PPTP Server IP Enter the Server IP provided by your ISP (optional).
Address:
Username:
Enter your PPTP username.
Password:
Enter your PPTP password and then retype the password in the next
box.
Select either Always-on, On-Demand, or Manual.
Reconnect
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection is
Time: maintained during inactivity. To disable this feature, enable Auto-reconnect.
D-Link DIR-850L User Manual
Internet Setup

PPTP

31