Remote Unit - American Audio DCD-PRO600 Operating Instructions Manual

GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT
4
2 3
1
18 19 20
A. REMOTE CONTROL - FACE (FIGURE 3)
1. FILTER/COAST/ADJUST - This button allow
you to change the FILTER and Coast values. With
the FILTER/COAST/ADJUST button selected (on)
the FILTER value is one second and the COAST
value is five seconds. With the FILTER/COAST/
ADJUST deselected (off) the FILTER value is a 1/
2 second and the COAST value is three seconds.
A yellow LED will indicated on and off functions.
2. CUE MEMORY - This button allows you to
program up to 4 cue points on the CD. For more
information on setting a cue point see page 20.
3. FILTER - This button activates the FILTER
©
5 6
7
21 22
31 32
American Audio - www.AmericanAudio.us - DCD-PRO600™ Instruction Manual Page 8
®
8 9
10
23 24 25
effect. This effect simulates the sudden platter
stop of a turntable. Almost like pressing the stop
button on a turntable. When the FILTER effect is
selected a number 1 will appear in the LCD (14),
this indicates the FILTER effect is active. See
"FILTER" effect on page 27.
4. REV/PLAY - This button activates reverse
play mode. When this effect is selected the disc
will begin to play in reverse mode, and continue
to play in reverse until reverse play function is
turned off. If reverse play is not turned off the
disc will continue to play in reverse until it returns
14
11 12 13
26
27 28 29
33
15 16 17
Figure 3
30
Figure 4
34