Technical Specifications - Dell Dimension 2350 User Manual

Back to Contents Page

Technical Specifications

Dell™ Dimension™ 2350 Series
Microprocessor
System Information
Expansion Bus
Memory
Drives
Ports and Connectors
Video
Microprocessor
Microprocessor type
L1 cache
L2 cache
System Information
System chip set
DMA channels
Interrupt levels
System BIOS chip
System clock
Expansion Bus
Bus types
Bus speed
PCI connectors
PCI connector size
PCI connector data width
(maximum)
Memory
Architecture
Memory connectors
Memory capacities
Minimum memory
Maximum memory
Memory type
Drives
Externally accessible
Internally accessible
Audio
Network
Controls and Lights
Power
Physical
Environmental
Intel® Pentium® 4 that runs at 1.80, 2.00, 2.40, or
2.50 GHz internally and 400 MHz externally;
Intel Celeron® that runs at 1.70, 2.00, 2.10, 2.20, or
2.30 GHz internally and 400 MHz externally.
NOTE: Microprocessor offerings vary by country.
8 KB first-level (Pentium 4); 32 KB (16-KB data cache;
16-KB instruction cache) (Celeron).
256- or 512-KB (displayed in the system setup
program) pipelined-burst, eight-way set associative,
write-back SRAM (Pentium 4);
128-KB SRAM that resides in the processor's core.
The L2 cache runs at the processor's internal clock
speed (Celeron).
Intel 845GL
seven
24 APIC mode
2 Mb (256 KB)
400-MHz data rate
PCI
PCI: 33 MHz
three
120 pins
32 bits
DDR SDRAM
two
128-, 256-, or 512-MB
128 MB shared DDR SDRAM
NOTE: Between 32 and 64 MB of system memory may
be allocated to support graphics, depending on system
memory size and other factors.
1 GB
PC2100 (266-MHz) DDR SDRAM
(non-ECC)
two 5.25-inch bays
one 3.5-inch bay
one bay for 1-inch–high IDE hard drive