Connecting Devices With Remote Control Connectors; Performing Operations By Rc On This Unit Without Visual; Contact; Remotely Connecting Marantz Devices - Marantz PM6005 Owner's Manual

Contents

Connecting devices with remote control connectors

Performing operations by RC on this
unit without visual contact
You can connect an external IR receiver to the REMOTE CONTROL
connectors to perform operations on this unit with the supplied remote
control unit without visual contact. This might be necessary if the unit is
hidden in a cupboard or corner, so you can't directly point with the remote
control unit to the device.
To do this, disable the remote control signal receiving function
(vpage 30 "Setting the remote signal receiving function of the
remote control unit").
IR receiver
RC OUT
NOTE
• When the remote control signal receiving function is disabled, you can not perform
operations with the remote control unit.
Front panel Rear panel
Connections Playback
Remote
Settings

Remotely connecting Marantz devices

You can transmit remote control signals simply by connecting a Marantz
audio device to the REMOTE CONTROL IN/OUT connectors using the
remote connection cable provided with the device.
Set the remote control switch located on the rear panel of the connected
audio component to "EXTERNAL" to use this feature.
21
Index
Tips Appendix