Connecting Devices With Remote Control Connectors; Performing Operations By Rc On This Unit Without Visual Contact; Remotely Connecting Marantz Audio Devices; Connecting The Power Cord - Marantz PM10S1GD Owner's Manual

Connecting devices with
remote control connectors
Performing operations by RC on
this unit without visual contact
You can connect an external IR receiver to the REMOTE
CONTROL connectors to perform operations on this unit with
the supplied remote control unit without visual contact. This
might be necessary if the unit is hidden in a cupboard or
corner, so you can't directly point with the remote control unit
to the device.
Infrared Infrared
retransmitter
sensor
RC OUT
.
Remotely connecting Marantz audio
devices
You can transmit remote control signals simply by connecting
a Marantz audio device to the REMOTE CONTROL IN/OUT
connectors using the remote connection cable provided with
the device.
Set the remote control switch located on the rear panel of the
connected audio component to "EXTERNAL" to use this
feature.
.

Connecting the power cord

Wait until all connections have been completed before
connecting the power cord.
To household power outlet
(AC 120 V, 60 Hz)
.
ENGLISH
Power cord (supplied)
16