5. Remove the screws.
Step
Screw (quantity)
16
M2 × 3 mm, wafer-head, nylon-coated (4)
17
M2 × 2.5 mm, wafer-head, nylon-coated (2)
6. Remove the system board
When installing: Ensure that the connector is attached firmly.
1140 mSATA transfer sub card
For access, remove these FRUs in order:
•
"1020 Base cover assembly" on page 61
•
"1030 Battery pack" on page 62
•
"1040 Hard disk drive or solid-state drive assembly" on page 63
•
"1050 Memory module" on page 65
•
"1060 PCI Express Mini Card for wireless LAN" on page 66
•
"1080 Thermal fan assembly" on page 68
•
"1130 System board assembly" on page 75
78
Hardware Maintenance Manual
18
.
Color
Torque
Black
0.196 Nm
(2.00 kgf-cm)
Black
0.196 Nm
(2.00 kgf-cm)