5. Remove the media card reader board.
When installing: Ensure that the connectors are attached firmly to the system board and the fingerprint
reader.
1110 Hall sensor
For access, remove these FRUs in order:
•
"1020 Base cover assembly" on page 61
•
"1030 Battery pack" on page 62
•
"1100 Media card reader" on page 71
Step
Screw (quantity)
1
M2 × 3 mm, wafer-head, nylon-coated (1)
1120 M.2 solid state drive
For access, remove these FRUs in order:
•
"1020 Base cover assembly" on page 61
•
"1030 Battery pack" on page 62
Attention:
Color
Torque
Black
0.196 Nm
(2.00 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
73