Table of Contents
Advertisement
7. Enter the following location in the [Copy manufacturer's files
from:] field.
For CE Type:
E:\Win95_98English\CE (*If your CD-ROM drive is E: drive)
For UC Type:
E:\Win95_98English\UC (*If your CD-ROM drive is E: drive)
8. Confirm that [FUJIFILM PICTRO SCSI Port] appears in the
[Available Printer Ports:] field and click the [New Port...] but-
ton.
The following appears when the file is copied.
9. Click the [Close] button.
The following appears:
10. Confirm that [PICTRO SCSI:] in [Available ports:] is checked
and click the [Next] button.
The following appears:
11. Click the [Have Disk] button.
The [Install From Disk] dialog box is displayed.
12. Enter the following location in the [Copy manufacturer's files
from:] field.
For CE Type:
E:\Win95_98English\CE (*If your CD-ROM drive is E: drive)
For UC Type:
E:\Win95_98English\UC (*If your CD-ROM drive is E: drive)
13. Click the [OK] button.
The following appears:
3. INSTALLATION
17
Advertisement
Table of Contents
