Using The Bluetooth Mobile Phone - JVC KW-NSX700 Instruction Manual

Using the Bluetooth mobile phone

Receiving a call
When a call comes in...
Status of the device/Battery
reminder (only when the
information comes from the device)
Rejects the call
• Phone operation is not available while the picture
from the rear view camera is displayed. (
When <Auto Answer> is set to [On]
The unit answers the incoming call automatically.
( page 60)
Ending a call
While talking...
Adjusting the volume of
microphone
While talking...
Call information
(if acquired)
• This adjustment does not affect the volume level of
the other sources.
• To adjust the volume of calls/earpiece, use VOLUME
–/+ (for KW-NSX700), or VOLUME/ATT knob (for KW-
NSX600) on the monitor panel.
Switching between handsfree mode
page 46)
and phone mode
While talking...
Each time you press the button, the talking method is
switched (
mode).
Notifying SMS reception
If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has been
received.
To read a received message, operate the mobile
phone after stopping the car in a safe place.
• You cannot read, edit, or send a message through
the unit.
• For some mobile phones, the notification message
may not be shown even if the SMS function is
supported.
56
: handsfree mode / : phone