Manual - FujiFilm FinePix S20 Pro Owner's Manual

STILL PHOTOGRAPHY FUNCTIONS
Shutter speed
５ ０ ０ Ｆ ５.６ ５ ０ ０
Ｍ
1 0
１ ０ ０ ０ Ｆ ８． ０ １ ０ ０ ０
Ｍ
N
The exposure indicator
Ｍ １ ０ ０ ０ Ｆ ８． ０ １ ０ ０ ０
44

MANUAL

３ ３ ３ ３
Ｉ Ｓ Ｏ ２ ０ ０ Ｉ Ｓ Ｏ ２ ０ ０
0 2
３ ３ ３ ３
Ｉ Ｓ Ｏ ２ ０ ０ Ｉ Ｓ Ｏ ２ ０ ０
Aperture
N
３ ３ ３ ３
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ ２ ０ ０ ２ ０ ０
Exposure
indicator
Set the Mode dial to " ".
Manual mode allows you to set any shutter speed
and aperture setting.
Setting the shutter speed
Turn the Command dial to select the shutter speed.
Selecting the "B" (Bulb) setting allows bulb shots to
be taken. In bulb photography, the shutter stays
open for as long as the shutter button is held down
(up to 30 sec.).
h Shutter speed settings
30 sec. to 1/10000 sec. in 1/3 EV increments
Bulb (B)
G
!
See P.117 for information on EVs.
G
!
Use of a tripod or cable release to prevent camera shake.
G
!
In shots with long exposures, noise (dots) may appear on the
image.
G
!
If the shutter speed is set to a speed faster than 1/2000 sec.,
smearing (white stripes) may appear in the image (➡P.117).
G
!
If the shutter speed is set to a speed faster than 1/1000 sec.,
the image may appear dark even if the flash is used.
Setting the aperture
1 Hold down the " " button.
2 Turn the Command dial to select aperture.
h Aperture settings
F2.8 to F11 in 1/3 EV increments
Use the exposure indicator on the screen as a guide
when setting the exposure.
When the brightness of the subject is outside the
camera's brightness metering range, the indicator
moves to the (+) end to show that the image will be
overexposed (the (+) turns yellow) or to the (–) end to
show that the image will be underexposed (the (–)
turns yellow).