Set-Up; I Set-Up Menu Options; Using The Set-Up Screen; Image Display - FujiFilm FinePix M603 Owner's Manual

SET–UP
I SET–UP Menu Options
Factory
Settings Display
default
IMAGE POSTVIEW/OFF/ Use this option to specify whether the Preview screen (the photographed
POSTVIEW
DISPLAY PREVIEW image) is displayed after you take a shot. See P.69 for details.
Use this option to specify whether the camera's power consumption is
POWER
2MIN/5MIN/OFF 2MIN reduced and the camera is subsequently switched off automatically when it
SAVE
is not being used. See P.70 for details.
USB MODE DSC/PC CAM DSC See P.71 for details.
DATE/TIME SET – Use this option to correct the date or time. See P.15 for details.
Allows you to set the volume of the beep emitted when the camera
SOUND HIGH/OFF/LOW HIGH
controls are used.
( xD-Picture Card )
Sets the media to be used when an xD-Picture Card and Microdrive are
MEDIA
( Microdrive ) loaded in the camera.
ENGLISH/FRANCAIS/
LANGUAGE ENGLISH Select English, French or German as the language used for screen display.
DEUTSCH
Resets all the camera settings other than the date and time to the
factory default values set at shipment. Press "c" to check the settings. If
RESET ALL OK –
you are happy with the settings shown, press the "MENU/OK" button
again.
USING THE SET–UP SCREEN
1
0 1 0 3 2 0
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
ＡＵＴＯ ＡＵＴＯ
ＭＡＮＵＡＬ ＭＡＮＵＡＬ
2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＰＯＳＴＶＩＥＷ ＰＯＳＴＶＩＥＷ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ２ ＭＩＮ ２ ＭＩＮ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ ＤＳＣ ＤＳＣ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＳＥＴ
ＳＯＵＮＤ ＳＯＵＮＤ ＨＩＧＨ ＨＩＧＨ
ＭＥＤＩＡ ＭＥＤＩＡ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 1 0 2
68
Explanation
1Press the "MENU/OK" button to display the
menu screen.
2Press "d" or "c" to select " " OPTION and
then press "a" or "b" to select "SET–UP".
3Press the "MENU/OK" button to display the
SET–UP screen.
G
!
Always switch the camera off when replacing the
batteries. If you open the battery cover or disconnect the
AC power adapter without switching the camera off, the
camera settings may revert to the factory default values
set at shipment.
1 Press "a" or "b" to select a menu option and
then press "d" or "c" to change the setting.
2 After you have modified the settings, press
the "MENU/OK" button to confirm the
changes.
G
!
Press "c" for "DATE/TIME" or "RESET ALL".

IMAGE DISPLAY

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＰＯＳＴＶＩＥＷ ＩＭＡＧＥ ＤＩＳＰＬＡＹ
ＰＯＳＴＶＩＥＷ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ
２ ＭＩＮ ２ ＭＩＮ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ ＤＳＣ ＤＳＣ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＳＥＴ
ＳＯＵＮＤ ＳＯＵＮＤ ＨＩＧＨ ＨＩＧＨ
ＭＥＤＩＡ ＭＥＤＩＡ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
POSTVIEW: Photographed images are displayed for approx. 2 seconds and then
automatically recorded.
OFF : Photographed images are automatically recorded without being displayed.
PREVIEW : Photographed images are displayed and you can then select whether to
record the images.
h To record the image: Press the "MENU/OK" button.
h To discard the image: Press the "BACK" button.
You can also use the preview zoom or select recorded images.
0 1 2 0
ＰＲＥＶＩＥＷ ＰＲＥＶＩＥＷ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
ＲＥＣ ＲＥＣ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 1 2 0
ＰＲＥＶＩＥＷ ＰＲＥＶＩＥＷ
ＲＥＣ ＲＥＣ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 3
You can use this setting to specify whether
photographed images are displayed after
shooting.
G
! In Long-period Continuous Shooting with 1280 × 960-
pixel mode, the photographed images are not displayed.
G
!
In top4-frame continuous shooting, final4-frame
continuous shooting, the images are displayed for a set
time before being automatically recorded even when
"OFF" is selected here.
Preview Zoom
When previewing is selected, this feature allows
you to check the image details.
1Slide the zoom switch to zoom in or out.
2Press "a", "b", "d" or "c" to view another
part of the image.
G
!
You cannot save a cropped image from the preview
screen.
G
!
Preview zoom works in the same way as the playback
zoom (➡P.30).
Selecting Images to Record
When previewing is selected, you can select and
record images shot using top4-frame continuous
shooting, final4-frame continuous shooting.
However, you cannot use the preview zoom.
1Press "d" or "c" to select an image you do
not want to record.
2Press "b" to display or hide the " " icon.
Images with the " " icon are not recorded.
Display the " " icon for all the images you do
not want to record.
3Press the "MENU/OK" button to record the
desired images.
5
69