Switching On And Off; Setting The Date And Time - FujiFilm FinePixA204 Owner's Manual

SWITCHING ON AND OFF

1
1Use the Mode switch to select the mode you
want to use.
2If you want to use the camera in Still
photography/Movie mode, open the lens cover.
ç
If the " " warning message
appears on the LCD monitor, slide the lens
cover completely.
●
!
Open and close the lens cover by fitting your finger
14
into the indentation in the cover.
2
1 0
2 0
When you slide the "POWER" switch sideways
to switch the camera on, the green viewfinder
lamp lights. To switch the camera off, slide the
"POWER" switch sideways again.
●
!
Take care not to press on the lens when it is
extending or while you are taking a shot as this could
cause a camera fault.

SETTING THE DATE AND TIME

1
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＮＯＴ ＳＥＴ ＮＯＴ ＳＥＴ
ＯＫ ＯＫ ＯＫ ＳＥＴ ＳＥＴ ＳＥＴ
ＢＡＣＫ ＢＡＣＫ ＮＯ ＮＯ
When you first switch the camera on, the date is
cleared. Press the "MENU/OK" button to set the
date and time.
●
!
To set the date and time later, press the "BACK"
button.
●
!
If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.
2
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ ＭＭ ＤＤ ＹＹＹＹ ＭＭ ＤＤ
２００２ ２００２ １ １ １ １
１２：００ １２：００ ＡＭ ＡＭ
ＯＫ ＯＫ ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
0 1
1 Use "d" or "c" to select Year, Month, Day,
Hour or Minute.
2 Press "a" or "b" to set the number.
●
!
If you hold down "a" or "b", the numbers change
continuously.
●
!
When the time displayed passes "12:00", the AM/PM
setting automatically switches.
1
2 0
15