Connecting To A Pc - FujiFilm FinePix S9000 Owner's Manual

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
5
1 0 2 0 3 0
TOTAL TOTAL :00009
01
SHEETS SHEETS
FRAME FRAME
YES YES CANCEL CANCEL
6
PRINT OK? PRINT OK?
TOTAL: 9 SHEETS
TOTAL: SHEETS
CANCEL CANCEL
YES YES CANCEL CANCEL
7
PRINTING PRINTING
1/9 SHEETS
SHEETS
CANCEL CANCEL
Disconnecting the printer
USB socket
(mini-B)
116
1 Press "d" or "c" to display the frame (file) for
which you want to specify PRINT settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the "MENU/OK" button after the
settings are completed.
●
!
Movies and images with CCD-RAW cannot be printed.
●
!
Images photographed with a camera other than FinePix
S9000 / FinePix S9500 may not be printed.
"PRINT OK?" appears on the screen. Press the
"MENU/OK" button to begin printing.
Printer starts printing the specified number of
prints.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1 Check that "PRINTING" is not displayed on the
camera's screen.
2 Turn the camera off. Unplug the USB cable
(mini-B).

6.3 CONNECTING TO A PC

6.3.1 Connecting to a PC
The "Connecting to a PC" section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.
¶ DSC (Mass storage device) mode
This mode provides a simple way to read images from a media and store images onto a media.
1
Gold
contact
area
Gold marking
2
0 1
2 0
DSC DSC
:
OK OK
1
: SET SET
2
: SET SET
:
ENGLISH ENGLISH
3
: SET SET
4 :
CD-ROM
(Software for FinePix
Insert the media into the camera.
w
1 Set the Power switch to " " to turn the camera
on.
¶ ò
2 Select " " DSC in " " USB MODE in the
˜
" " SET-UP menu (➡P.100).
3 Turn the camera off.
●
!
Use the AC Power Adapter AC-5VX (sold separately) for the
connection (➡P.112). If shutting off power supply during
communication, the files on the media may be damaged.
●
!
If inserting an xD-Picture Card and a CF/Microdrive into the
camera at the same time, images will be recorded onto the
¡
media selected as the " " MEDIA (➡P.100).
Continued
CX )
6
117