Disconnecting The Camera - FujiFilm FinePix S5700 Owner's Manual

Windows XP / Vista
A The help message appears in the bottom-right corner
of your screen. This message will close when the
settings are completed. No action is required.
CAUTION
This step is not required for subsequent connections.
B FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the Power switch to OFF to turn off the camera and then
disconnect it from the PC.
Proceed to "Using FinePixViewer" (➝p.138).

Disconnecting the camera

1
Windows
Once the image has been saved, the window below
appears (Save Image Wizard window). To disconnect
the camera, click the [Remove] button.
Macintosh
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
Continued Q
137