6.1 Camera Connection - FujiFilm FinePix S20 Pro Owner's Manual

6

6.1 CAMERA CONNECTION

Viewing Images
6.1.1 Using the AC power adapter ( sold separately )
Always use a FUJIFILM AC Power Adapter AC-5VH/AC-5VHS (➡P.106).
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to the computer. Using the AC power adapter also allows you to take pictures
and play back images without worrying about depleting the batteries.
G
!
Only connect or disconnect the AC power adapter when the camera is off.
Connecting or disconnecting the AC power adapter while the camera is on temporarily interrupts the power supply to the
camera, so that images or movies being shot at the time are not recorded. Failing to turn the camera off first can also
result in damage to the media or malfunctions during PC connection.
DC IN 5V socket
Connecting the AC power adapter does not allow you to charge the Ni-MH batteries. Use the
optional charger (➡P.106) to charge the Ni-MH batteries.
6.1.2 Connecting to a TV
1
A/V OUT
(Audio/Visual output)
socket
2
Video (yellow)
To terminals
Audio (white)
6.1.3 Connecting to a computer
The "Connecting to a computer" section explains how to connect the camera to your computer
using the USB cable (IEEE 1394 cable) and describes the functions you can use once the camera
and computer are connected.
98
Check that the camera is off. Plug the AC power
adapter connector into the "DC IN 5V" socket and
then plug the AC power adapter into the power
outlet.
G
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
G
!
The shape of the plug and socket-outlet depends on the
country of use.
G
!
See P.108 for notes on using the AC power adapter.
Turn off the camera and TV. Plug the included A/V
cable (provided with the camera) into the "A/V
OUT" (Audio/Visual output) socket.
G
!
When there is a power outlet available, connect the AC
Power Adapter AC-5V.
Plug the other end of the cable into the video input
socket on the TV. Then turn the camera and TV on
and take pictures or play back images as you
would normally.
G
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a computer.
Refer to Section 5 the first time you connect the camera to your computer.
Install the software first. Do not connect the camera with
the computer before installing all the software.
h If your PC supports USB 2.0 (High-speed USB), data can be transferred faster than with previous
USB versions.
DSC ( Mass storage device ) mode
This mode provides a simple way to read images from a media and store images on to a media.
The USB (FireWire) or IEEE 1394 interface connection can be used for high-speed file transfer
(➡P.100).
To connect via an IEEE 1394 port, check that the interface is OHCI compliant and then refer to the
table below to check whether it is supported by your operating system.
I Operating system compatibility chart (Windows)
OS
Windows 98 SE
Windows 98
(Second Edition)
Connection type
✕ ✽
IEEE 1394 u
✽ Select Windows Update from the Start button menu and update the 1394 device driver (Your system must be capable of
connecting to the Internet).
I Operating system compatibility chart (Macintosh)
OS
Mac OS 8.6 Mac OS 9.0.4
Connection type
✽
✕ ✕
IEEE 1394
✽ Cannot be used even when installed as FireWire interface standard feature, but can be used by downloading and installing
the free update to Contact Apple Computers (http://www.apple.com) for information on software updates.
PC PC CAM ( PC camera ) mode
This function allows you to conduct videoconferencing sessions between PCs connected to the
Internet.
G
!
Videoconferencing ("PictureHello") is not supported on Macintosh computers.
G
!
Connection is only possible with a FUJIFILM camera equipped with a "PC Camera" function.
For more information on using the software, refer to "How
to use FinePixViewer" in the HELP menu which was
installed from the CD-ROM.
Change between " " and " PC" in the camera's SET-UP screen.
IEEE 1394 photography function
For information on taking pictures using IEEE 1394, refer to the Hyper Utility Software HS-V2
Ver.2.0 (or later) Help menu.
CD-ROM
(Software for FinePix SX)
: Can be connected ✕: Cannot be connected
u
Windows Me Windows 2000
Windows XP
(Millennium Edition) (Professional)
u u u
: Can be connected ✕: Cannot be connected
u
Mac OS 9.1 Mac OS 9.2.1 Mac OS X
u u u
99