Dpof All Reset; Set-Up; I Set-Up Menu Options; Using The Set-Up Screen - FujiFilm FinePix S20 Pro Owner's Manual

DPOF ALL RESET

PHOTO MODE PLAYBACK
1
1 0 2 0
2
1 0 2 0
Ｄ Ｐ Ｏ Ｆ Ａ Ｌ Ｌ Ｒ Ｅ Ｓ Ｅ Ｔ Ｄ Ｐ Ｏ Ｆ Ａ Ｌ Ｌ Ｒ Ｅ Ｓ Ｅ Ｔ
Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ
3
Ｒ Ｅ Ｓ Ｅ Ｔ Ｄ Ｐ Ｏ Ｆ Ｏ Ｋ ？ Ｒ Ｅ Ｓ Ｅ Ｔ Ｄ Ｐ Ｏ Ｆ Ｏ Ｋ ？
ＯＫ ＯＫ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ BACK BACK Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ やめる やめる
82
1 Set the Power switch to " ".
2 Press the ( ) button.
1 Press "d" or "c" to select " " DPOF ALL RESET.
2 Press the "MENU/OK" button.
A message appears.
To reset all the DPOF settings, press the
"MENU/OK" button (or ( ) button).
4

SET-UP

Settings

I SET-UP menu options

Settings Display Factory default
IMAGE DISP. ON/OFF/PREVIEW ON
(xD-Picture Card)
MEDIA
(Microdrive)
POWER SAVE 2 MIN/5MIN/OFF 2 MIN
FORMAT OK –
OFF/1/2/3 2
BEEP
SHUTTER OFF/1/2/3 2
DATE/TIME SET –
ADAPTER YES/NO NO
FRAME NO. CONT./RENEW CONT.
CCD-RAW OFF/ON OFF
ENGLISH
VIDEO SYSTEM NTSC/PAL –
USB MODE
/ PC
1394 MODE
/ 1394
DISCHARGE OK –
RESET OK –

USING THE SET-UP SCREEN

1
1 0 0 2
Ｓ Ｅ Ｔ − Ｕ Ｐ Ｓ Ｅ Ｔ − Ｕ Ｐ
１ ／ ３ １ ／ ３
Ｉ ＭＡ Ｇ Ｅ Ｄ Ｉ Ｓ Ｐ ． Ａ Ｇ Ｅ Ｄ Ｉ Ｓ Ｐ ． Ｏ Ｎ Ｏ Ｎ
Ｍ Ｅ Ｄ Ｉ Ａ Ｍ Ｅ Ｄ Ｉ Ａ
Ｐ Ｐ ＯＷ ＯＷＥ Ｒ Ｓ Ａ Ｖ Ｅ Ｅ Ｒ Ｓ Ａ Ｖ Ｅ ２ Ｍ Ｉ Ｎ ２ Ｍ Ｉ Ｎ
Ｆ Ｏ Ｆ Ｏ ＲＭ ＲＭＡ Ｔ Ａ Ｔ Ｏ Ｋ Ｏ Ｋ
Ｂ Ｅ Ｅ Ｐ Ｂ Ｅ Ｅ Ｐ
Ｓ Ｈ Ｕ Ｔ Ｔ Ｅ Ｒ Ｓ Ｈ Ｕ Ｔ Ｔ Ｅ Ｒ
Explanation
Use this option to specify whether the Preview images (the
photographed image) is displayed after taking a shot. See P.84
for details.
Sets the media to be used when an xD-Picture Card and
Microdrive are loaded in the camera.
Use this option to reduce the camera's power consumption and
to subsequently turn the camera off when not being used. See
P.86 for details.
Erases all files. See P.86 for details.
Sets the volume of the tone emitted when the camera controls
are used.
Sets the volume of the sound emitted when the shutter operates.
Use this option to correct the date or time. See P.16 for details.
Select this setting when a conversion lens is used. See P.87 for
details.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.88 for details.
Sets the image quality to CCD-RAW. Because no image
processing is performed on the camera for CCD-RAW images,
images must be processed on a computer.
Use this setting to specify the language used for screen display.
Specifies whether video output is set to NTSC or PAL.
Selects the function when the camera is connected to a PC.
See P.98 for details.
Download images to a computer or use third-party photo-shooting
software to take pictures from a computer. See P.98 for details.
Discharges Ni-MH batteries. See P.109 for details.
Resets all the camera settings (other than the DATE/TIME,
LANG. and VIDEO SYSTEM) to the factory default values set at
shipment. A confirmation message appears when you press "c".
To reset the camera settings, press the "MENU/OK" button again.
1 Set Power switch to " ".
2 Set the Mode dial to "
" to display the SET-UP
menu.
G
!
Always turn the camera off when replacing the batteries.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
Continued 83