Table of Contents
Advertisement
System Setup
•
OSD Setup:
1. H-Position - Adjusts the horizontal position of the OSD menu.
2. V-Position - Adjusts the vertical position of the OSD menu.
3. OSD Timeout - Sets the display duration of OSD menu from 10 to 120 seconds.
4. DDC/CI - Enables or disables the DDC/CI (Display Data Channel/Command
Interface).
•
Information: Displays resolution and refresh rate.
•
Language: Sets the OSD language.
•
Device Share: Enables or disables the Device Share feature. When enabled, the HDMI
item under the Input Select menu will be displayed as HDMI with Device Share.
•
All Reset: Resets all OSD settings to defaults.
Exit
Exit from the OSD menu.
Input signal selection
The Input Select menu appears when you connect an HDMI cable to the rear HDMI ports or
a Thunderbolt cable to one of the Thunderbolt ports on the left panel. Use the Menu Up or
Menu Down buttons to select input source and press the Menu button to activate the option.
Refer to Input Select in the previous section for details.
26
All-in-One PC ET2301
Advertisement
Table of Contents
