Table of Contents
Advertisement
Auto Adjust: Adjusts the horizontal position (H-Position) and the
vertical position (V-Position) of the image. This function is configurable
only when you use the All-in-One PC as a standard desktop LCD monitor
and set the Display-input port as the input source.
Input Select
PC: Sets the All-in-One PC as the display signal source.
HDMI with Device Share: Enables the device share feature of your All-
in-One PC
System Setup
OSD Setup:
•
Adjusts the horizontal position (H-Position) / vertical position
(V-Position) of the OSD menu.
•
Adjusts the OSD timeout from 10 to 120 seconds.
•
Enables or disables the DDC/CI (Display Data Channel/Command
Interface) function.•
Information: Shows the monitor information.
Language: Allows you to set the OSD language.
All Reset: Allows you to reset all OSD settings.
Device Share: Turns the device share function on or off.
Input signal selection
An Input Select OSD menu appears when you connect the HDMI or
Thunderbolt cable to the rear HDMI-input or Display-input port. Use
the Menu up or Menu down keys to navigate through the input options
and press the MENU button to activate the option. Refer to Input
Select in the previous section for details.
ASUS All-in-One PC ET2702I
31
Advertisement
Table of Contents
