Onkyo TX-NR929 Owner's Manual page 13

■
Aiming the remote controller
To use the remote controller, point it at the AV
receiver's remote control sensor, as shown below.
Remote control sensor
■
Installing the batteries
Batteries (AA/R6)
Note
• If the remote controller doesn't work reliably, try replacing
the batteries.
• Don't mix new and old batteries or different types of
batteries.
• If you intend not to use the remote controller for a long time,
remove the batteries to prevent damage from leakage or
corrosion.
• Remove expired batteries as soon as possible to prevent
damage from leakage or corrosion.
AV receiver
Approx. 16 ft. (5 m)
En-13
Safety Information and Introduction