Table of Contents
Advertisement
Turning
the Camera
on and Off
Shooting
Mode
Pressthe ON/OFF button to turn the camera on.
The lenswill extend and the lenscover will open.
Press ON/OFF again to turn the camera off.
%. Tip: Switchingto PlaybackMode
Press tile []
button
to start playback.
Press the shutter
button
halfway to return to shooting
mode.
[M Cautions
• Pictures carl be affected by fingerprints and other
marks on the lens. Keep the lensclean.
• Tile ON/OFF button does not completely disconnect
tile camera from its power supply.
To turn the camera on and begin playback, press
the []
button for about a second.
Press the []
button again to turn the camera off.
%.Tip:Switching t oShooting M ode
To exit to shooting mode, press the shutter button
halfway. Pressthe [] button to return to playback.
12
%.Tip:Auto Power Off
Tile monitor will dim to save power if no operations are performed for a while in shooting mode. Full brightness
carl be restored by operating any of the camera controls. Tile camera will turn offautomatically if no operations
are performed for tile length of time selected in the AUTO POWEROFF menu (seepage 78). Toturn the camera
on, pressthe ON/OFF button or pressthe []
button for about a second.
Advertisement
Table of Contents
