Pioneer VSX-1023-K Operating Instructions Manual page 26

4
4
• When digital input (optical or coaxial) is selected, this
receiver can only play back Dolby Digital, PCM (32 kHz to
96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal
formats. The compatible signals via the HDMI terminals
are: Dolby Digital, DTS, SACD (DSD 2 ch only), PCM
(32 kHz to 192 kHz sampling frequencies), Dolby TrueHD,
Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio
and DVD Audio (including 192 kHz). With other digital
signal formats, set to A (analog).
• You may get digital noise when a LD or CD player
compatible with DTS is playing an analog signal. To prevent
noise, make the proper digital connections
set the signal input to C1/O1 (digital).
• Some DVD players don't output DTS signals. For more
details, refer to the instruction manual supplied with your
DVD player.
Tip
• In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following.
VSX-1023
(page 16) and
Video
SAT/CBL DVD
TUNER
Video (VSX-1023 only)
Reassignable
DVD
(page
Video/Audio (HDMI)
DVD SAT/CBL BD GAME DVR/BDR
Audio
CD TV
RECEIVER
SIGNAL SEL
51)
3
26
Basic playback
Audio
DVD SAT/CBL CD
NETWORK RECEIVER
SIGNAL SEL
3
Audio
ADAPTER
1.
TV
(TV input)
Other than TV input
2.
RECEIVER
SIGNAL SEL
Audio
DVD SAT/CBL
RECEIVER SIGNAL SEL
A
A
3
ANALOG IN1 audio input terminal is
assigned to CD under factory settings. If
you want to change this to TV input,
A
please change the settings in the Input
Assign menu (page 51).
4
7
TV
62
C1
O1
3