Pre-Deployment - Step 5: Management Ip - Dell Active Fabric Manager Deployment Manual

To assign switch identities:
1. Locate the CSV file that contains the system MAC addresses, serial numbers, and service tags for the switches in
the fabric. Contact your Dell Networking sales representative for this file.
2. Navigate to the Network >
3. From the Deploy Fabric pull-down menu, select the Pre-deployment Configuration screen option.
4. Navigate to the Assign Switch Identities screen.
5. Click the Browse button and specify the path of the CSV file. If you do not have this file, manually enter this
information in the System MAC Address fields.
6. Click the Upload button.
7. Click the Action icon in each row to associate the switch name with the MAC address, serial number, and service
tags using the CVS file or manually enter this information.
8. Map the system MAC address, serial number, and service tag to each switch.
9. Click Next to the go to the Assign Management IP screen.
Pre-Deployment – Step 5: Management IP
To assign a management IP address to each switch in the fabric, use the Management IP screen.
NOTE: Before you begin, gather the addresses for all the switches in the Layer 2 or Layer 3 fabric for the
management port. All management switch IP addresses must be on the same subnet.
Figure 24. Assign Management IP to Each Switch in the Fabric
To assign a management IP address to the switches in the fabric:
1. Navigate to the Network >
2. From the Deploy Fabric pull-down menu, select the Pre-deployment Configuration option.
3. Navigate to the Management IP screen.
4. In the Default Gateway field, enter the address of the default gateway for the management interface.
5. In the Management Route field, enter the route and prefix of the management interface.
6. In the Start Management IP Address/Prefix fields, enter the starting management IP address and prefix.
7. Select the switches to assign a management IP address.
Fabric Name > Configure and Deploy screen.
Fabric Name > Configure and Deploy screen.
63