Dell Force10 C150 Manual page 52

Deploying the dell force10 mxl into a cisco nexus network environment
Hide thumbs Also See for Force10 C150:
Table of Contents

Advertisement

Deploying the Dell Force10 MXL into a Cisco Nexus Network Environment
N5K2 Running Configuration
version 5.2(1)N1(1)
hostname N5K2
no feature telnet
cfs eth distribute
feature lacp
feature vpc
feature lldp
banner motd #Nexus 5000 Switch
#
no ip domain-lookup
logging event link-status default
class-map type qos class-fcoe
class-map type queuing class-fcoe
match qos-group 1
class-map type queuing class-all-flood
match qos-group 2
class-map type queuing class-ip-multicast
match qos-group 2
class-map type network-qos class-fcoe
match qos-group 1
class-map type network-qos class-all-flood
match qos-group 2
class-map type network-qos class-ip-multicast
match qos-group 2
vrf context management
vlan 1,11-13
spanning-tree pathcost method long
spanning-tree vlan 1,12 priority 28672
spanning-tree vlan 11,13 priority 24576
vpc domain 10
peer-keepalive destination 172.25.188.60 source 172.25.188.61
ip arp synchronize
port-profile default max-ports 512
interface port-channel10
switchport mode trunk
spanning-tree port type network
vpc peer-link
interface port-channel20
switchport mode trunk
vpc 20
interface port-channel40
switchport mode trunk
interface Ethernet1/1
switchport mode trunk
channel-group 20 mode active
interface Ethernet1/2
switchport mode trunk
channel-group 20 mode active
interface Ethernet1/3
interface Ethernet1/4
interface Ethernet1/5
interface Ethernet1/6
interface Ethernet1/7
interface Ethernet1/8
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

Force10 mxl 10 gbe

Table of Contents