Dell Force10 C150 Manual page 35

Deploying the Dell Force10 MXL into a Cisco Nexus Network Environment
Te 1/2 Dis
...
...
Te 1/30 Dis
Te 1/31 Dis
Te 1/32 Dis
Te 1/43 Altr 128.228 128 2000
Te 1/45 Root 128.230 128 2000
MSTP Test - Failover: Local Interface Failure Simulation
After logging in to both the MXL2 and the N5K2, a ping was issued to MXL2 once every second from the
N5K2. While the pings were in progress, interface 1/45 on MXL2 was shut down and an observation was
made regarding how many pings were lost. As shown below, only one ping was lost. This means that the
re-convergence took approximately 1 second to occur.
NX5K2# ping 192.168.0.42 interval 1 count 1000 PING 192.168.0.42 (192.168.0.42): 56 data
bytes Request 0 timed out
64 bytes from 192.168.0.42: icmp_seq=1 ttl=254 time=3.228 ms
64 bytes from 192.168.0.42: icmp_seq=2 ttl=254 time=7.365 ms
64 bytes from 192.168.0.42: icmp_seq=3 ttl=254 time=5.275 ms
64 bytes from 192.168.0.42: icmp_seq=4 ttl=254 time=3.046 ms
64 bytes from 192.168.0.42: icmp_seq=5 ttl=254 time=7.768 ms
64 bytes from 192.168.0.42: icmp_seq=6 ttl=254 time=3.042 ms
64 bytes from 192.168.0.42: icmp_seq=7 ttl=254 time=3.031 ms
64 bytes from 192.168.0.42: icmp_seq=8 ttl=254 time=3.025 ms
64 bytes from 192.168.0.42: icmp_seq=9 ttl=254 time=3.051 ms
Request 10 timed out
64 bytes from 192.168.0.42: icmp_seq=11 ttl=254 time=4.052 ms
64 bytes from 192.168.0.42: icmp_seq=12 ttl=254 time=7.738 ms
64 bytes from 192.168.0.42: icmp_seq=13 ttl=254 time=3.07 ms
64 bytes from 192.168.0.42: icmp_seq=14 ttl=254 time=3.032 ms
128.187 128 200000 DIS
128.215 128 200000 DIS
128.216 128 200000 DIS
128.217 128 200000 DIS
BLK
2000 P2P
2000 P2P
2000 P2P
2000 P2P
2000 P2P
FWD 2000 P2P
No No No
No No No
No No No
No No No
No No No
No No No
35