Kyocera FS-1028MFP Operation Manual page 373

Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
Login
Log in using the procedure below.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Login User Name
*******************
Login Password:
Logout
OPERATION GUIDE
1
L b
[ Login ]
2
3
4
To log out the machine, press the Logout key to return
to the login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
• When the Power key is pressed to enter the sleep
mode
• When auto sleep is activated
• When auto panel reset is activated
• When auto low power mode is activated
If the screen below appears during the operations,
perform the following login operations.
Press the OK key, enter the login user name, and
then press the OK key.
Press the key to select [Login Password], press
the OK key, enter the login password, and then
press the OK key.
Check the login user name and password are
correct, and press [Login] (the Right Select key).
Management
11
11-5