Kyocera FS-1028MFP Operation Manual page 293

Login User Name:
*******************
Login Password:
Timer Setting:
1 Err. Clear Timer
*********************
2 Sleep Timer
3 PanelReset Timer
Auto Err. Clear: a b
1 *Off
*********************
2 On
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds). The default setting is 30 minutes.
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
Sys. Menu/Count.:a b
4
User/Job Account
5 User Property
6
********************* Common Settings
OPERATION GUIDE
L b
[ Login ]
4
a b
[ Exit ]
5
6
7
8
1
[ Exit ]
Default Setting (System Menu)
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
The Timer Settings menu appears.
Press the or key to select [Auto Err. Clear].
Press the OK key. Auto Err. Clear appears.
Press the or key to select [Off] or [On].
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
8
or
8-101