Connecting Component-Video Devices; Connecting S-Video Or Video Devices - BenQ W1500 User Manual

Connecting component-video devices

Be sure to match the corresponding colors between the cables and the terminals. The RCA type
component video jacks are provided for connection to video output devices. You should also connect the
separate audio cable to a suitable audio amplifier.
AV equipment: DVD player, digital
tuner, etc.

Connecting S-Video or video devices

You need to connect only S-Video or composite Video cable from the same device, never both at the
same time. You should also connect the separate audio cable to a suitable audio amplifier.
AV equipment
• If you have already made a Component Video connection between the projector and the video source
device, you need not connect to this device again using an S-Video or composite Video connection as this
makes an unnecessary second connection of poorer picture quality. You need only connect using a
composite Video connection if both Component Video and S-Video are not supplied on the video source
device (for example, with some analog video cameras).
• If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, please check that the video source device is turned on and operating correctly. Also
check that the signal cables have been connected correctly.
From audio output
terminals
Component video cable
From audio output To audio input terminals
terminals
S-Video cable
or
Video cable
To audio input
terminals
Important safety instructions 23