To connect a serial mouse
1. If you're using Windows 95, go to step 2.
–or–
If you're using Windows for Workgroups, save your work and exit Windows.
You'll be rebooting the OmniBook.
2. Attach the serial cable to the docking system.
3. Dock the OmniBook.
4. If you're using Windows 95, go to step 5.
–or–
If you're using Windows for Workgroups, reboot the OmniBook.
5. This step sets up the serial mouse for use.
If you're using Windows 95
Click Start, Settings, Control Panel, Mouse, General.
Click Change, then select Standard Serial Mouse.
If you're using Windows for Workgroups
From Program Manager, select Windows Setup.
Select Serial Mouse.
Using the Docking System
Making Connections
serial connector
1-19