To Undock The Omnibook - HP OmniBook 800 - Notebook PC User Manual

To undock the OmniBook

1. Make sure ac power is connected to the docking system.
2. If you're using Windows 95, go to step 3.
–or–
If you're using Windows for Workgroups, save your work and exit Windows.
You'll be rebooting the OmniBook.
3. Exit any applications that are using SCSI or network devices.
4. If you have a video card installed and are using Windows 95, select Start, Shut
Down, Shut Down the Computer.
5. Press the Undock button on the docking system.
–or–
Undock button
If you're using Windows 95, you can select Eject PC from the Start menu
instead.
When the red light turns on, you have approximately 10 seconds to slide the
release latch forward and remove the OmniBook—otherwise, the OmniBook
automatically docks again.
If you have a video card installed and a docking password set, then the screen
will become blank and beep repeatedly until you enter the password.
Using the Docking System
Understanding the Basics
On/Off button
Undock button
When the red light
turns on, you can
slide the release
latch forward and
remove the
OmniBook.
1-11