Removing A Sim - HP Mini 5103 User Manual
Hp mini user gudie - windows xp, windows vista, windows 7
Hide thumbs
Also See for Mini 5103:
- Maintenance and service manual (139 pages) ,
- Getting started (52 pages)
Table of Contents
Advertisement
6.
Remove the battery.
7.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
8.
Replace the battery.
NOTE:
9.
Turn the computer right-side up, and then reconnect external power and external devices.
10.
Turn on the computer.
Removing a SIM
To remove a SIM:
1.
Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the
computer on by pressing the power button. Then shut down the computer through the operating
system.
2.
Close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface.
6.
Remove the battery.
HP Mobile Broadband will be disabled if the battery is not replaced.
Using HP Mobile Broadband (select models only)
35
Advertisement
Table of Contents
