System Configuration Menu - HP Mini 5103 User Manual

Select
Create New BIOS User Account password
Password Policy (requires a BIOS administrator password)
HP SpareKey
Always Prompt for HP SpareKey Enrollment
User Tools
Change Password
HP SpareKey Enrollment
Disk Sanitizer
System IDs

System Configuration menu

NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select
Language
Boot options
110 Chapter 13 Computer Setup
To do this
●
Select from a list of BIOS users.
●
Select from a list of ProtectTools users.
Revise password policy criteria.
Enable/disable HP SpareKey (enabled by default).
Enable/disable HP SpareKey enrollment (enabled by default).
Enter, change, or delete a BIOS administrator password.
Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
● Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk
Sanitizer erase cycles from a list.
● Last Pass: Displays Disk Sanitizer Completion Report
CAUTION: If you run Disk Sanitizer, the data on the primary
hard drive is destroyed permanently.
Enter a user-defined computer asset tracking number and
ownership tag.
To do this
Change the Computer Setup language.
●
Set a Startup Menu delay in seconds.
● Set the MultiBoot Express Boot Popup delay in seconds.
●
Enable/disable Custom Logo (disabled by default).
●
Enable/display Display Diagnostic URL.
●
Enable/disable SD card boot.
●
Enable/disable floppy boot.
● Enable/disable PXE Internal NIC boot.
●
Enable/disable USB device boot.