Setting The Power On Picture Mode; Adjusting The Computer Image - Insignia NS-50D400NA14 User Manual

Insignia 46/50" LED TV

Setting the power on picture mode

You can set the picture mode your TV uses when
you turn it on.
To set the power on picture mode:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
3 Press or to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
4 Press or to highlight Power on in Vivid
Mode, then press ENTER.
5 Press or to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off ),
then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting the computer image

When you connect a computer to your TV using the
VGA jack, you may need to adjust the computer
image to improve the quality.
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For
2 Press MENU. The on-screen menu opens.
3 Press
4 Press
5 Press
6 Press
7 Press MENU to return to the previous menu, or
www.insigniaproducts.com
Note
The Computer Settings option is only
available when a computer is connected
to the VGA jack on the back of your TV.
more information, see "Selecting the video
input source" on page 39.
or to highlight SETTINGS, then press
ENTER. The SETTINGS menu opens.
or to highlight Computer Settings,
then press ENTER. The SETTINGS · COMPUTER
SETTINGS menu opens.
or to highlight an option, then press
ENTER to access the option. You can select:
• Auto Adjust—Automatically adjusts the
image settings such as position and phase.
• H. Position—Moves the image right or left.
• V. Position—Moves the image up or down.
• Clock—Minimizes vertical stripes in the
screen image.
• Phase—Adjusts the focus of stable images.
• Reset Computer Settings—Resets all
computer settings to factory mode.
or to adjust the option, or press
to select a setting.
press EXIT to close the menu.
or
43