Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-50D400NA14 User Manual

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
36
NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
www.insigniaproducts.com
Cautions
• Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
depleted.
• If the remote control is not going to be
used for an extended period of time,
remove the batteries.
sensor on the front of your TV. For the location
of the remote sensor, see "Front" on page 8.