Tv Components; Package Contents; Front - Insignia NS-42L260A13A User Manual

4 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.
6
15.68 in. (400 mm)
Wall-mount brackets
www.insigniaproducts.com
NS-42L260A13A Insignia 42" LCD TV

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand base and screws (4)
• Power cord
• Quick Setup Guide
• Important Information

Front

# Item Description
Turns off when your TV is on.
1
Power indicator
Lights red when your TV is off (standby mode).
Receives signals from the remote control. Do not block.
2
Remote control sensor
Press to open the on-screen menu. For more
3
MENU
information, see
Press to open the Input Source list, press CH
CH
INPUT again. For more information, see
4
INPUT
the video input
In menu mode, press to confirm selections.
5
VOL+/VOL– Press to increase or decrease the volume.
Press to go to the next or previous channel in the
6 channel list. For more information, see
CH /CH
channel" on page 24.
Press to turn your TV on or off (standby mode). When
7
your TV is off, power still flows through it. To
/POWER
completely disconnect power, unplug the power cord.
"Navigating the menus" on page 23.
to select a video input source, then press
"Selecting
source" on page 22.
"Selecting a
or