Iviewfinder Lamp Display - FujiFilm FinePix A101 Owner's Manual

1.3 megapixels
Hide thumbs Also See for FinePix A101:
Table of Contents

Advertisement

TAKING PICTURES ( AUTO MODE )
STILL IMAGE MODE
3
Be careful to ensure that the lens, flash and
flash control sensor are not obscured by your
hands or the camera strap.
G
!
If the lens, flash or flash control sensor is obscured
by your fingers or the camera strap, you may not be
able to obtain the correct brightness (exposure) for
your shot.
G
!
Check that the lens is clean. If it is dirty, clean the
20
lens as described on P.67.
4
LCD monitor
View Finder
Use the LCD monitor or viewfinder to locate your
subject in the frame.
G
!
To frame your shot precisely, you should take the
picture using the LCD monitor.
G
!
In some conditions it may be difficult to see your subject
clearly on the LCD monitor. (Such as in sunny weather
outdoors or when you are shooting dimly lit scenes.) In
such situations, use the viewfinder to take the shot.
5
Beep
When you press the shutter button, the camera
emits a short beep and takes the picture. The
data is then recorded.
G
!
When you press the shutter button, there is a very
short delay before the picture is actually taken.
G
!
The viewfinder lamp flashes orange while the flash is
charging. If the LCD monitor is switched on, the
screen may go dark for a moment. This is normal
and does not indicate a fault.
G
!
The flash charging time may increase when the battery
charge getting lower.
G
!
Since the amount of image data recorded is not fixed and
varies depending on the subject (level of image detail,
etc.), the number of available shots may not decrease
after the image is recorded, or may decrease by 2.
G
!
See P.73 – 74 for information on the warning displays.
I
Viewfinder lamp display
Color Status
Meaning
Green
Lit
Ready to shoot
Image being recorded onto the
Lit
SmartMedia.
Orange
Flashing
Flash charging
h SmartMedia warning
No
SmartMedia
loaded,
SmartMedia not formatted,
incorrect format, write-protect
sticker used, SmartMedia full,
Red
Flashing
SmartMedia error.
✽ When the LCD monitor is
switched on, details of the
warning are displayed on the
monitor (➡P.73).
During image recording, the viewfinder lamp
glows orange and you cannot take pictures.
Note also that switching the camera off or
opening the battery cover during image
recording could corrupt the image files.
2
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents